Westpoort VCA Eindtermen Basis, VOL, VIL VCU Engels

- -

Balanced

Requirements (chisels) -

Rear handle: protection against chain breakage

No burrs on the chisel head

-

Chisel must be equipped with hand protection

- Control lock, with automatic release of the control button

Requirements (pliers) -

Safety precautions - Operator has an appropriate training with test - Trousers and gloves with anti-cut and blocking fibres - Set up in such a way that the chain does not touch the body in the event of kickback - Use the correct bar/chain combination - Always operate the chainsaw with two hands Requirements, hazards and safety measures for hand tools Requirements (hammer) - Head securely on the stem - Stem intact - Head clear

Jaw and hinge are intact and clean

Requirements (knives) -

Knife adapted to the nature of the work

-

Sharp knives

Safety measures (knives) -

Cut away from the body

- Do not extend the extendable blade too far - Break off the worn part of the blade with a blade breaker or pliers

Requirements (sawing) -

Saw adapted to the work

Safety measures (sawing) -

Only use well-sharpened, sharp saw blades

Requirements (wrenches) - Be undamaged - Jaw fits snugly on nut

- - -

Good setting of the saw Tighten the blade properly

Teeth forward

Safety measures (wrenches) -

Only extend the stem with the correct accessories

- Preferably use a ring spanner instead of an open-end spanner - Impact wrench has a string to prevent it from falling/shooting out if knocked loose

Examples (hoisting equipment) Cranes, tower cranes, gantries, hand hoists

Requirements (screwdrivers) -

Function (hoisting equipment) Vertical and horizontal movement of loads

Be exactly sized for the screw slot

-

Blade not too sharp

Definition (lifting accessories) Auxiliary materials for lifting loads (e.g. eye bolts, shackles, lifting straps, chains, cables)

Safety measures (screwdrivers) -

Clamp/secure small workpieces

Requirements (filing) - The handle must be in good condition and undamaged - Handle is firmly attached to file

General requirements (hoisting equipment and lifting accessories)

VCA (SCC) Final objectives | Page 38 of 66